User Guide
UniversalTAP: Fiber Aggregator | P10GXXA-X | 4.22.1
This document describes the front panel, LED indications, interfaces, rear panel, rear switch and
installation procedure for the P10GXXA-X. The unit supports three application modes; breakout,
aggregate and span. LFP and Fail Mode (open) are supported on the network ports for the breakout
and aggregate modes via the optical splitter.
Front Panel
LED Indications
Port 1 LFP
LFP LED
Port 1 L/A
Link/Activity LED
Port 2 LFP
LFP LED
Port 2 L/A
Link/Activity LED
Port 3 H/M
N/A
Port 3 L/A
Link/Activity LED
Port 4 H/M
N/A
Port 4 L/A
Link/Activity LED
LED 1
Bypass Mode
Bypass LED
LED 2
N/A
LED 3
N/A
Interfaces
Breakout Mode
Port 1
Network Port
Port 2
Network Port
Port 3
Breakout Port Ingress Port 1
Port 4
Breakout Port Ingress Port 2
Aggregate Mode
Port 1
Network Port
Port 2
Network Port
Port 3
Aggregate Port Ingress Port 1 / Port 2
Port 4
Aggregate Port Ingress Port 1 / Port 2
Span Mode
Port 1
Network Port
Ingress Span Port 2 / Port 3 / Port 4
Port 2
Span Port
Ingress Port 1
Port 3
Span Port
Ingress Port 1
Port 4
Span Port
Ingress Port 1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2022 Garland Technology, LLC. All rights reserved.
1
