![background image](http://html1.mh-extra.com/html/garland/mo-wo-3500/mo-wo-3500_installation-operation-and-maintenance-manual_3618803021.webp)
Control Unit Installation
• One control unit is provided for each cook zone.
NOTE: Install the operating unit in an UPRIGHT position.
NOTE:
DO OT dis-assemble the control unit or remove / loosen any screws on the control unit.
FROT-MOUT METHOD
To mount the control unit onto the
front of the panel:
1. Use the dimensions provided
or the actual unit as a
template, create holes for
screws and the body of the
control unit.
2. Fasten the control unit to the
panel (fasteners not provided).
Illustration: Measurements in mm and
[inch].
Front Panel
BACK-MOUT METHOD
NOTE: For this type of installation, the maximum thickness of the panel must not exceed 1.5mm or 16 gauge. This restriction
ensures a proper grip on the knob and the LED light will not be obstructed.
To mount the control unit onto the
back of the panel:
1. Use the dimensions provided
(left), create on the panel all
the holes indicated.
2. Remove the plastic knob from
the control unit and fasten
the control unit to the panel
(fasteners not provided).
Illustration: Measurements in mm and
[inch].
Front Panel
12 [ .474]
10.11 [ .398]
11.91 [ .469]
maximum
1.5 [0.06]
Summary of Contents for MO/WO 3500
