Garland INT40G2SR44 Page 31 User Manual Download | Manualshive

Page: 31 / 43

background image

User Guide

EdgeLens | INT40G2XX44 | 4.22.1

Load Balancing Policy

The load balancing policy determines the hashing applied to all load balancing groups, taps in the load

balance mode and the ATLB2 chained mode. The load balancing policy options are as follows:

IPv4 Source

L4 Source Port

IPv4 Destination

L4 Destination Port

IPv6 Source

MAC Source

IPv6 Destination

MAC Destination

1. Select Load Balancing Policy.

The Load Balancing Policy panel will be displayed.

2. Select or deselect the desired load balancing policy options.

3. Select Save to save updates.

4. Select Cancel to disregard changes.

Config Map

Config maps are unidirectional connections between ingress port(s) to egress port(s) and/or a load

balancing group.

1. Select Create Config Map on the Packet Broker Configurations panel.

2. Select Create Config Map.

The Create Config Map panel will be displayed. Any previously created load balancing groups

or filter templates will be displayed along with the new options. Any port shaded gray can be
used for a config map, any port shaded black may not be used.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

31

«
...
29
30
31
32
33
...
»

Summary of Contents for INT40G2SR44












































Reviews:

No comments

Related manuals for INT40G2SR44

Brand: D-Link Pages: 38

Brand: D-Link Pages: 8

Brand: D-Link Pages: 22

Brand: D-Link Pages: 20

Brand: D-Link Pages: 2

Brand: D-Link Pages: 16

Brand: D-Link Pages: 12

DIR-615 - Wireless N Router

Brand: D-Link Pages: 13

Brand: D-Link Pages: 124

Web Smart DES-1210-28P

Brand: D-Link Pages: 6

2Voice + 4SW VoIP Router DVG-1402S

Brand: D-Link Pages: 57

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 23

Express EtherNetwork DI-604

Brand: D-Link Pages: 7

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 97

SharePort DIR-825

Brand: D-Link Pages: 2

Amplifi DIR-645

Brand: D-Link Pages: 28

Brand: Maxim Pages: 26

Brand: NetComm Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands