Garland H280 Series, Instructions Manual

Page: 1 / 23

03/09/09 P/N 4523367 Page 1
H280-series Valve Overheat / Relocation Kit Instructions: RC Ovens
Instructions for Applying Kit #4523368
This kit is for a convection
RC, 36” oven
only
. For a Standard 36” oven, use Kit #4522559
Installation Prerequisites:

RC Oven, Piezoelectric Ignition

U-Burner with no welded bracket
Tools Needed:

Wrenches

Small Hacksaw (for extension installation if required)

Screwdrivers (Robertson, Flat), long and short

Riveter

Electrical Tape
Parts:
Part # Description Quantity
1415703 Baso Safety Valve 1
4522554
7/16” x 10” Flex Tube
2
4522558 Pre-
bent 3/16” Tubing
1
076050-89
3/16” Union
1
M231 1/4IN X 3/16IN CC COMP Nut 2
M126 1/4IN TO 3/16IN SLEEVE - Ferrule 2
1095499 7/16cc
– 3/8 NPT Straight Connector
2
4522557 Valve Bracket 1
F60 #10 x 5/8 Sheet Metal Screw 4
M123 7/16IN C.C. COMPRESSION - Nut (for Flex Tube end) 2
M122 7/16IN C.C. BALL SLEEVE - Ferrule (for Flex Tube end) 2
F312 LOCK NUT-10-24 K-LOCK - Nut (for Baso Valve) 1
F587 BOLT # 10-24 x 2-1/4 SL - Bolt (for Baso Valve) 1
4522556 Redesigned Kick Panel 1
4522201 Welded Bracket Oven Burner 1
F32 #10-24 x ½ Pan HD Type F Screw (For Pilot Bracket) 1
070239-10 RC Pilot Natural Gas 1
078239-11 RC Pilot Propane 1
M124
¼” Tubing Ferrule
1
M125
¼” Comp. Nut
1
1415000 Robertshaw Thermocouple 1
4521446
¼” x 12” Flex Tube
1
4523367 MANUAL-HIGH HEAT KIT-RC 1
G7227-1 Lighting Instructions 1
M121 Rivet 2