![background image](http://html1.mh-extra.com/html/garland/gi-mo-du-7000/gi-mo-du-7000_installation-operation-and-maintenance-manual_3611391030.webp)
30
Part Number 4532415 Rev 5 12/15
ELECTRICAL CABLES
Cable Kit
•
Cable kit voltage versions: 208V or 400V
•
Standard, 2.5-meter cable kit, includes:
•
Coil Cable, 2.5-meter [98”]
•
CAN/BUS RJ-45 Cable, 3-meter [118”]
•
Sensor Cable, 1-meter [39”]
•
Fan Cable is included where applicable.
•
Options, 4-meter cable kit, includes:
•
Coil Cable, 4-meter [157.5”]
•
CAN/BUS RJ-45 Cable, 5-meter [197”]
•
Sensor Cable, 1-meter [39”]
•
Fan Cable is included where applicable.
•
Option, 6-meter cable kit, includes:
•
Coil Cable, 6-meter [236.2”]
•
CAN/BUS RJ-45 Cable, 7-meter [276.6”]
•
Sensor Cable, 1-meter [39”]
•
Fan Cable is included where applicable.
•
There are different cable kits for Round coil (RU)
components and Full coil (FL) components.
•
RU cable kit descriptions:
IN/MO7000/10000-
360 or IN/MO7000/10000
•
FL cable kit descriptions:
IN/MO7000FL-360 or
IN/MO14000
OPERATING CONDITIONS
For the appliance to function properly, the following
conditions must be maintained.
Maximum Tolerance of
Nominal Supply Voltage
+6 /-10 %
Network Impedance
(Zmax.)
0.25Ω
Supply frequency
50/60 Hz
Ingress Protection class
IP X0 (Protection by customer is
required.)
Maximum Ambient
Temperature
In Storage,
-4°F to +158°F [-20°C to +70°C]
In Operation,
+ 41°F to +104°F [+5°C to +40°C]
Maximum Relative Air
Humidity
In Storage, 10% to 90%
In Operation, 30% to 90%
Induction Generator,
Maximum Fan Air Flow
120m
3
per hour [70.63 cfm]
Minimum opening for fresh air
supply: total sum of 6500mm
2
[10.08 square inches] per generator.
Minimum opening for exhaust:
total sum of 6500mm
2
[10.08 square
inches] per generator
Temperature Regulator
Potentiometer 10 kOhm
Indicator Lamp
24VDC / max. 40mA (Green)
Induction cooking pan
bottom diameter
Minimum, 12cm [5”]
Amperage Nominal Value
— 400V, 3Φ
10A for the 7kW generator (4 x
1.5mm
2
)
15A for the 10kW generator (4 x
2.5mm
2
)
2 x 10A for the 14kW generator (2 x
(4 x 1.5mm
2
))
Amperage Nominal Value
— 208V, 3Φ
20A for the 7kW generator (4x AWG
10)
29A for the 10kW generator (4x
AWG 8)
2 x 20A for the 14kW generator (2 x
(4 x AWG 10))
3Φ = Three Phase