USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 23 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
3
Front Panels
3.1 M40G1AC
– M40G1AC with 3 M40GBP modules
Figure: 10. M40G1AC front panel.
3.2 M40G1AC
– Management panel
Figure: 11. M40G1AC front panel.
3.2.1 Bypass Switch 1U Host System LEDs & Switches Specifications
LEDs:
----------------------------FRONT----------------------------------
Two Power LEDs: PS1, PS2
1.
PS1: Green LED will light when power is on and off
if there is a failer in power supply module or when
extracting the power supply module from the system.
2.
PS2: Green LED will light when power is on and off
if there is a failer in power supply module or when
extracting the power supply module from the system.
System Status LEDs: 3 LEDs
1.
Sys OK: System Normal Operation – Light Green.
Who I’m: in rack identification – Blinking
Green.
2.
Sys UP: System Init during power up and during
shutdown – Light Yellow.
3.
ALM: System Alarm – Light Red.
