USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 147 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
9.5 M10GSS2BP
9.5.1 Dual rate Fiber 10G/1G Ethernet Technical Specifications - (10G Base-LR /
100BaseLX) Adapters:
IEEE Standard / Network topology:
1000Base-LX, 10GBase-LR (1310nM)
Data Transfer Rate:
20Gbit/s in full duplex mode per port
Network ports Cables and Operating
distance:
Single mode fiber:
5000m maximum at 9 um
**
Insertion Loss ( Passive: Normal
Mode)
Typical: 1.2 dB
Maximum: 1.6dB
Insertion Loss ( Passive: Bypass
Mode)
Typical: 1.2 dB
Maximum: 1.6dB
Voltage:
12V +/-5%, 5VSB+/-5%, 5V +/-5%
Size:
102.2mm x161.9 mm x 40.5 mm (4.02” x 6.37” x 2”)
Wide x Depth x Height
Operating Humidity:
0%–90%, non-condensing
Operating Temperature:
0°C – 40°C (32°F - 104
F)
Storage Temperature:
-20
C–65
C (-4
F–149
F)
EMC Certifications:
Class B FCC / CE / VCCI /
Safety:
UL
MTBF*:
> 150,000 hours
9.5.2 M10GSS2BP/SRD: LED and Connector Specifications
LEDs:
Green LED per port (Network / Monitor)
Activity : LED will blink.
Link : LED will turn on.
Bi-color LED:
Inline Mode – Green color
Non Inline Mode :Bypass, TAP, Disconnect – Yellow (Orange) color.
HB Status LED
Blinking Green LED – HB is active.
LED is off – HB not active.
Connectors
:
Network: 4 LC Duplex
Monitor: 4 SFP+
10
Safety Precautions
