USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 99 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.62.10 set_snmp_srv_ip - modify the IP address of the main SNMP server
set_snmp_srv_ip xxx.xxx.xxx.xxx
- set MAIN snmp server ip address
(default - 192.168.0.6).
M40GBP$ sel_snmp_entry 2
command succeeded.
M40GBP$ get_snmp_entry
========== entry index 2 ============
snmp user: test1
snmp version: 3
snmp community status: off
snmp community access: read.
snmp server ip address: 192.168.0.7
192.168.0.33
snmp password:
command succeeded.
M40GBP$ set_snmp_srv_ip 192.168.0.44
New SNMP setting will take effect after apply_snmp.
command succeeded.
M40GBP$ apply_snmp
SNMP restart is in progress, please wait.
command succeeded.
M40GBP$ get_snmp_entry
========== entry index 2 ============
snmp user: test1
snmp version: 3
snmp community status: off
snmp community access: read.
snmp server ip address: 192.168.0.44
192.168.0.33
snmp password:
command succeeded.
M40GBP$
