Garland EdgeLens INT10G8SR56 User Manual Download Page 74

Page: 74 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

Port Configuration

The port configuration is displayed by default. The Description, Set Speed and Mode may be

modified. All other options are displayed only. However, they may be updated by selecting Refresh.

Port Description

1. Modify the port description by placing the cursor on Port Description for the desired port

and press the left mouse button.

The Edit Description panel will be displayed.

2. Place the cursor in the description field and enter the new description.

3. Select Set to save updates.

4. Select Cancel to return to the Port Configuration panel.

Set Speed

1. Modify the port speed by selecting the pull down panel for the desired port.

2. Select the desired speed.

3. Select Save to save updates.

Mode

1. Modify the port mode by selecting the pull down panel for the desired port.

2. Select the desired mode. The available port modes are Normal, Loopback, Listen Only

and Force Link.

3. Select Save to save updates.

Port Statistics

The following statistics may be displayed on the Port Statistics panel.

Port number

Receive Errors

Transmit Errors

Receive Packets

Transmit Packets

Receive Discards

Transmit Discards

1. Select Port Statistics on the Port Configuration panel.

The Port Statistics panel will be displayed.

2. Update the statistics by selecting Refresh.

3. Clear and refresh the statistics by selecting Clear.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands