manualshive.com logo in svg

Garland EdgeLens INT10G8SR56, User Manual, Page: 68 / 76

Share
Download
Garland EdgeLens INT10G8SR56 User Manual Download Page 68

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

3. One load balancing group plus separate port(s) may be applied. The traffic applied to the ports

assigned to the load balancing group will follow the hashing per the load balancing policy. 100% of
the traffic will be sent to each of the separate port(s).

Figure 34 Egress Load Balancing Group and Port(s)

4. Remove a port or load balancing group by selecting the Red X.

 

Egress Filter

1. Select the gray filter icon on the desired egress port.

Figure 35 Egress Filter

The

Port XX Egress Filters panel

will be displayed.

2. Add filters by placing the cursor on the desired filter template. A previously created filter

template or the new filter template option may be selected. Select with the left mouse button. Drag the
filter template to the Port XX Egress Filters panel and release. The filter template will become an
actual egress filter once the config map is saved.

Filters may be added in any combination. If multiple filters are added, then the top filter is the

highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.

Figure 36 Port XX Egress Filters

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

68

Summary of Contents for EdgeLens INT10G8SR56













































































Reviews:

No comments