Garland EdgeLens INT10G8SR56 User Manual Download Page 64

Page: 64 / 76

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

1. Select Load Balancing Groups.

The Load Balancing Groups panel will be displayed.

2. Select Create Group.

The Create New Load Balance Group panel will be displayed.

3. Enter the name. If no name is entered the system will automatically apply a name as follows,

lbg, lbg(2), lbg(3), etc.

4. Enter the description, optional.

5. Add ports by placing the cursor on the desired port. Select with the left mouse button. Drag the port to

the New L.B. Group panel and release. Repeat for all desired ports. Ports may be added in any
combination.

6. Remove a port by placing the cursor on the port in the New L.B. Group panel and double press the left

mouse button.

7. Select Save.

8. Select Cancel to return to the Load Balancing Groups panel.

The load balancing group will be displayed on the Load Balancing Groups panel. The assigned

ports will also be displayed.

9. Edit the load balancing group by selecting the Edit for the desired group.

10. Deleted the load balancing group group by selecting the red X. Load balancing groups may not be

deleted if used on a config map.

Load Balancing Policy

The load balancing policy determines the hashing applied to all load balancing groups, taps in the load

balance mode and the ATLB2 chained mode. The load balancing policy options are as follows:

IPv4 Source

L4 Source Port

IPv4 Destination

L4 Destination Port

IPv6 Source

MAC Source

IPv6 Destination

MAC Destination

1. Select Load Balancing Policy.

The Load Balancing Policy panel will be displayed.

2. Select or deselect the desired load balancing policy options.

3. Select Save to save updates.

4. Select Cancel to disregard changes.

Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

Summary of Contents for EdgeLens INT10G8SR56













































































Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands

Garland EdgeLens INT10G8SR56, User Manual

Search results

Summary of Contents for EdgeLens INT10G8SR56

Reviews:

Related manuals for EdgeLens INT10G8SR56

Brands by name

Popular brands