manualshive.com logo in svg

Garland EdgeLens INT10G8SR56, User Manual, Page: 32 / 76

Share
Download
Garland EdgeLens INT10G8SR56 User Manual Download Page 32

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

2. Enter the No. Of Lost HB Packets. Default is 10.

This is the number of heartbeats that must be lost on any inline appliance port before any

tap will switch from the primary inline appliance to the secondary inline appliance to bypass.

3. Enter the Heartbeats per Second. Default is 10.

This is the number of heartbeats per second applied to the primary inline appliance and

secondary inline appliance ports for all taps.

4. Select Save to save updates.

5. Select Cancel to return the Bypass Taps panel.

 

Configure Primary-Secondary Tap Mode

1. Edit the tap mode by placing the cursor on any tap and double-press the left mouse button.

The Tap panel will be displayed.

2. Place the cursor on the Primary-Secondary Mode Select option. Select with the left mouse button.

Drag the Primary-Secondary option to the blue box and release.

3. Select the red X to remove.

4. Place the cursor on the Inline Appliance option. Select with the left mouse button. Drag the Inline

Appliance option to the blue box and release.

5. Select the red X to remove.

6. Select Save to save updates.

The Bypass Taps panel will be displayed. Inline (Primary) will be displayed.

7. Place the cursor on the tap and double-press the left mouse button.

The Tap panel will be displayed. Green indicates Active, Yellow indicates Standby.

8. Select Cancel to return the Bypass Taps panel.

 

Taps Settings

The following configuration options may be displayed, modified, enabled or disabled.

Tap Modes
Fail Mode
LFP
Reverse Bypass

1. Edit the Tap Settings, by placing the cursor on any tap and double-press the left mouse button.

The Tap panel will be displayed.

2. Select Edit Tap Settings.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

32

Summary of Contents for EdgeLens INT10G8SR56













































































Reviews:

No comments