Instructions for: 89421
SNOW RAKE ASSEMBLY
Write for Garelick Mfg. Co. Phone: 651-459-9795
A complete 644 2
ND
Street, P.O. Box 8 E-mail: [email protected]
EEz-In Catalog St. Paul Park, Minnesota 55071 Website: www.garelick.com
Rev A 09/12
12.646
ASSEMBLY INFORMATION:
Check parts against parts list.
Read instructions completely before starting assembly.
SNOW RAKE ASSEMBLY INSTRUCTIONS:
STEP 1: Insert Snow Rake angled tube (A) between top edge and tab on blade (B). Align holes, secure with bolt (C)
lock nut (D).
STEP 2: Align slot of roller (K) at blade (B) edge and push roller onto blade until roller rotates. Repeat other side.
STEP 3: Attach FLAT end of brace (E) to blade (B) by aligning holes and securing with bolt (F) and lock nut (D).
Repeat for other side.
STEP 4: Attach CURVED end of braces (E) to angled tube (A) by aligning holes and secure in place with bolt (C) and
lock nut (D).
STEP 5: Squeeze legs of snap button (J) together and insert into the swaged end of the extension tube (H). Repeat
operation for other extension tubes.
STEP 6: Slip poly grip (G) on the end of one extension tube (H). NOTE: Grip will go on easier by heating in warm
water.
STEP 7: To assemble rake for use, depress snap button (J) on pole, insert extension tube into angled tube end so
snap button pops through hole. Repeat with extension tubes (H) until complete.
SNOW RAKE AND POLE PARTS LIST
Ref.
Letter
Part No.
Description
Qty.
A
61.002
Angled Tube (Snow Rake)
1
B
61.008
Blade
1
C
03.080
1/4-20 x 1-1/2" Bolt
2
D
03.862
1/4-20 Locknut
4
E
61.004
Brace
2
F
03.861
1/4-20 x 1/2" Bolt
2
G
06.605
1" Poly Grip
1
H
61.003
Extension Tube
4
J
03.232
Snap Button
4
K
06.291
Rollers
2
