background image

Basic Safety Instructions 

2511 

2.4 

Hazardous Substances 

ACHTUNG ! 

The operating company bears the responsibility for the use of the WOB-L

®

 Piston

Pumps. 
Hazardous substances in the gases to be pumped can cause personal injuries and 
property damage. Pay attention to the warning notices for handling hazardous sub-
stances. 

The local regulations apply in foreign countries. 

Combustible, aggressive and explosive Gases 

Don’t pump combustible, especially aggressive or explosive gases or vapors or operate this 
pump in an atmosphere containing combustible or explosive gases or vapors.  
Examine before switching on whether that can form gas combustible gas/air mixtures which 
can be promoted! Consider the regulations of the guideline 1999/92/EC. 

The WOB-L

®

 Piston Pumps are not certified according to ATEX guidelines 

2014/34/EU

.

The WOB-L® piston pumps are not recommended for pumping acidic, basic or organic va-
pors. 

Poisonous Gases 

Use a 

condensate 

separator 

(eg. Woulff bottle) 

when pumping poisonous or harmful gases.

Prevent such substances from leaking out of the appliance or pump. Treat these 
substances according to the applicable environmental protection regulations. 
Test the strength and leak-tightness of the connecting lines and the connected apparatus. 
Prevent environmental poisons, e.g. mercury, getting into the pumps.  
Fulfil the requirements, for example: 

German Hazardous Substances Regulation (GefStoffV) of 01. December 2010 
Regulation

 

2016/1179/EU

(

c

lassification, 

p

ackaging and 

l

abelling

 of hazardous substances),

 

Manufacturer's safety data sheets on hazardous substances. 

2.5 

High Temperatures 

The WOB-L

®

 Piston Pumps may heat up as a result of the temperature of the gas being

pumped and through compression heat.  
Prevent the following maximum permissible temperatures from being exceeded. 

+ 40 °C for the environment, and  

+ 60 °C for the gas to be pumped. 

The electric motor has a thermal overload protection. 

Summary of Contents for Welch WOB-L 2511B-02
















Reviews: