![background image](http://html1.mh-extra.com/html/gardner-denver/welch-lvs-105-t-10-ef/welch-lvs-105-t-10-ef_operation-manual_3569511042.webp)
Operation
42
Operation Manual LVS 105 T
– 10 ef
+
Display log files
1. Select the "System settings" menu option.
2. Select the "Log files" menu option.
3. Select the "Display log files" menu option.
4. Select a log file.
5. Confirm your entry.
Delete log files
1. Select the "System settings" menu option.
2. Select the "Log files" menu option.
3. Select the "Display log files" menu option.
4. Press the rotary encoder for 2 s.
5. You will see "Do you really want to delete log files?"
6. Confirm your selection with "Yes."
6.3.3
Reset to factory settings
1. Select the "System settings" menu option.
2. Select the "Reset to factory settings" menu option.
3. Confirm your selection with "Yes."
NOTE
After selecting "Yes" (with check mark), the language is set back to the factory setting
(English). All values are also reset to the factory settings.
6.4 "PC-Control 601" PC software (Option)
The
PC-Control 601
PC software is used for the remote control of the vacuum controller of
the device. In general, the PC software offers the same control options as found in the end
device. In addition, the following operations are possible with the PC software:
Firmware updates
Transfer time and date from the PC
Factory settings and factory calibration (not public)
6.4.1
Installation
NOTE
The PC software can be downloaded as installer package. The file "setup.exe" installs
the PC software and the required CVI Runtime Environment.
1. Select the "PC-Control 601" PC software. It is available as freeware from
in the "Service" menu à download area.
2. Call up the PC software with "VC601_XXX.exe" in the installation directory.
NOTE
XXX describes the sequential version number of the PC software.