![background image](http://html1.mh-extra.com/html/gardner-denver/welch-lvs-105-t-10-ef/welch-lvs-105-t-10-ef_operation-manual_3569511033.webp)
Operation
Operation Manual LVS 105 T
– 10 ef
+
33
6.2.2
Operating mode 2 Automatic
In the
automatic operating mode,
a material separation of a mixture with up to four compo-
nents can be performed.
PARAMETER
VALUE
Unit
Detection Gradient
0
mbar / min
∆p Distillation Ramp
0
mbar
∆t Distillation Ramp
00:00:00
hh:mm:ss
Number of Cycles
1
#
Parameter
Values from/to
Resolution
Default
Unit
Detection Gradient
-200...200
1
0
mbar/min
∆p Distillation Ramp
-1000...0
1
0
mbar
∆t Distillation Ramp
01:00:00...23:59:59
01:01:01
1:00:00
hh:mm:ss
Number of Cycles
1...4
1
1
Vent at Finish
Yes / No
No
Maximum RPM Speed
10...100
1
50
%
The separation of the material mixture is done by searching for the boiling point of the re-
spective component via the detection gradient.
If the pressure gradient changes with a sudden increase or drop when a component be-
gins to boil, then this pressure value will be assumed as start setpoint.
The distillation of the components is then done by running the distillation ramp.
The user must specify the detection gradient for boiling and the distillation ramp for the
component separation.