Target groups
The target groups for these operating instructions
are operators, maintenance personnel and electri-
cians.
After training, the
operator
is permitted to start up
and shut down the compressor and activate the
emergency-stop.
Maintenance personnel
may, in conjunction with
the information in these operating instructions,
maintain the compressor, repair it, start it up and
shut it down and activate the emergency-stop.
Electricians
may electrically install the compres-
sor, carry out direction of rotation checks and carry
out electrical maintenance work.
Safety conditions
Alongside all the other details in these operating
instructions, the general safety instructions, in the
chapter "Safety Conditions", must be read without
fail.
1.2
Notes
General information
The operating instructions must be read and used
by every person who is assigned to work with and
on the compressor.
Irrespective of these operating instructions, the
laws, regulations, directives and standards applic-
able in the place of use must be observed.
Training
The provision of local operator training is under-
taken by authorised service technicians. The train-
ing documentation comprises these operating in-
structions and the repair manual, which is only is-
sued as part of service training.
These measures ensure that the assigned work
can be reliably carried out.
Warranty
Gardner Denver will not be held liable for the safe
functioning of the compressor if it used other than
for its normal use or for purposes not listed in the
operating instructions.
Gardner Denver Deutschland GmbH excludes all
warranty and liability in the event of:
Operating errors.
Use of the compressor for other than the in-
tended purpose.
Damage resulting from deliberate misuse or
non-observance of the operating instructions.
Damage or injuries caused by non-OEM com-
ponents.
Use of spare or wear parts or operating fluids
that do not originate from or are not currently
recommended by or have not been previously
recommended by Gardner Denver Deutschland
GmbH.
Inadequate maintenance.
Compressor conversions.
Warranty and liability conditions of the general
business conditions of Gardner Denver Deutsch-
land GmbH are not expanded by the aforesaid in-
formation.
Guarantee
The conditions and caveats of Gardner Denver
Deutschland GmbH warranty are specified in our
general terms and conditions, which were supplied
with the compressor.
.
Upon request, an additional
copy of the document can also be sent retrospec-
tively.
Copyright
These operating instructions are subject to copy-
right and may only be used for the agreed pur-
pose, i.e. as a reference for in-plant purposes.
Forwarding or reproduction of this document, ex-
ploitation and sharing of its content are forbid-
den, insofar as this is not expressly authorised.
Infringements will incur payment of compensa-
tion. All rights reserved for the case of granting of
a patent, petty-patent or design registration.
Reselling
If the compressor is resold, these operating in-
structions must be handed over to the new oper-
ator together with the compressor. If necessary,
the operating instructions must be reordered from
Gardner Denver by specification of the order con-
firmation number. The compressor must not under
any circumstances be resold without these operat-
ing instructions.
1.3
Intended use
The compressor conforms to the state of the art
and the applicable safety conditions at the time of
its bringing to market provided it is used for its in-
tended purpose.
From a design point of view, neither intentional
misuse nor all of the residual dangers can be
avoided, without limiting the intended functionality.
The compressor is designed for the compres-
sion of atmospheric air (compressed air for driving
pressure equipment). The compressor is not suit-
able for the compression of other gases.
Summary of Contents for L110 10A V4
Page 73: ......
