GardenGrill 5001600 Page 37 Original Instruction Manual Download

Page: 37 / 65

- 37 -

CONNECTING THE GAS CYLINDER TO THE APPLIANCE

This appliance is only suitable for use with low-pressure butane or propane gas and fitted with the appropriate low-pres

sure regulator via a flexible hose. The hose should be secured to the regulator and the appliance with hose clips. This

barbecue is set to operate a 28 mbar regulator with butane gas and a 37 mbar regulator with propane gas. Use a suitable

regulator certified to BSEN 12864: 2001. Please consult your LPG dealer for information regarding a suitable regulator for

the gas cylinder.

STORAGE OF APPLIANCE

Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed from the appliance. When
the appliance is not to be used for a period of time it should be stored in its original packaging and stored in a dry dust
free environment.

GAS CYLINDER

The Capacity of Gas Bottle is:5-15KG
The Gas Bottle should be assembly in the out side of Gas BBQ
The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder must be disconnec-
ted. Replace the protective cap on the cylinder after disconnecting the cylinder from the appliance.

Cylinders must be stored outdoors in an upright position and out of the reach of children. The cylinder must never be

stored where temperatures can reach over 50°C. Do not store the cylinder near flames, pilot lights or other sources of

ignition. DO NOT SMOKE.

This barbecue is designed for use outdoors, away from any flammable materials. It is important that there are no over

head obstructions and that there is a minimum distance of 1 m from the side or rear of the appliance. It is important that

the ventilation openings of the appliance are not obstructed. The barbecue must be used on a level, stable, non-flamma

ble surface. The appliance should be protected from direct draughts and shall be positioned or protected against direct
penetration by any trickling water (e.g. rain).

Parts sealed by the manufacturer or his agent must not be altered by the user. No modifications should be made to any

part of this barbecue and repairs and maintenance should only be carried out by a repairs and maintenance should only

be carried out by Gas Safe registered service engineer in UK or by qualified engineers for other countries.

CONNECTION TO APPLIANCE

Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator, burner and burner

ports. Spiders and insects can nest within and clog the burner/venturi tube at the orifice. A clogged burner can lead to a
fire beneath the appliance.

Clean burner holes with a heavy-duty pipe cleaner.

Fit the hose to the appliance using a spanner to tighten it onto the connection thread. If the hose is replaced it must be

secured to the appliance and regulator connections with hose clips. It is necessary to change the flexible hose when the

national conditions require it.
Disconnect the regulator from the cylinder (according to the directions supplied with the regulator) when the barbecue is
not in use.

The Barbecue must be used in a well ventilated area. Do not obstruct the flow of combustion air to the

burner when the barbecue is in use. ONLY USE THIS BARBECUE OUTDOORS.