1-800-876-5520 • gardeners.com
8% of our profits
go back to our communities.
Learn more at gardeners.com/
FoRCE-FoR-GoOD
1331V Rev 11/19
#8600288, 8600289, 8600301
Hemp Grow Frame, Lights and Tray
Frame Assembly
Parts List
(11) 28" TUBES
(4) 27" TUBES
(4) 18" TUBES
(4) 14" TUBES
(8) 3-WAY CONNECTORS
(4) 4-WAY CONNECTORS
(2) T CONNECTORS
(2) WIRE SHELVES
1.
Assemble the frame as shown in
Fig. 1
. Make sure the TUBES are fully pressed
into the CONNECTORS.
2.
Place the WIRE SHELVES on the top and middle tiers of the frame.
Light Assembly
Parts
List
Tools
(2) FLAT SUPPORTS
ALLEN WRENCH (included)
(2) LIGHT BRACKETS with CLIPS
Phillips or flathead screwdriver (not included)
(3) LIGHTS
(1) BINDING BOLT (2 pieces)
(4) BOLTS
(2) LINKING CABLES
(1) POWER CORD
(4) HANGER ASSEMBLIES (
Fig. 5 & 6, see reverse side
)
3.
Line up the holes in the centers of the FLAT SUPPORTS and slide one half of the BINDING BOLT through them. Place the other half
of the BINDING BOLT through the other side and use your screwdriver to attach them (
Fig 2.
)
NOTE:
The FLAT SUPPORTS will feel
loose even after tightening.
4.
Examine the channels on top of the LIGHT BRACKETS to find the attached nuts (
Fig 3.
). Use the ALLEN WRENCH to spread them
out and position the holes in the ends of the FLAT SUPPORTS over them. Place a BOLT through each hole and use the ALLEN
WRENCH to tighten them into the nuts.
5.
Adjust the ends of the FLAT SUPPORTS so they are centered on the LIGHT BRACKETS, using the numbers on the BRACKETS as a
reference.
over please
FLAT SUPPORTS
(pressed together)
screwdriver
BINDING BOLT
Figure 2
BINDING
BOLT
LIGHT BRACKETS
LIGHT BRACKET
(top channel)
nut
BOLT
FLAT SUPPORTS
Figure 3
BINDING
BOLT
3-WAY
3-WAY
3-WAY
3-WAY
T
4-WAY
4-WAY
27"
18"
14"
28"
28"
28"
28"
28"
27"
18"
14"
FIGURE 1
