Base Pole
with Stake
Footed
Stake
Support
Center Pole
Figure 1
Narrow
Pole
1188V Rev 10/18
#8598238
Turquoise Leaf Wind Spinner
This Spinner is a great way to draw attention to your yard. The contrasting
turquoise and copper colors create a dazzling display when they’re spinning in
the wind.
Parts List
(1) Base Pole with Stake
(2) Nuts
(1) Footed Stake Support
(2) Caps
(1) Center Pole
(2) Finials
(1) Narrow Pole
(1) Wrench
(1) Top Pole with horizontal bar
(2) Spinners
Assembly
NOTE:
Assembly is easiest with two people.
Step 1.
Select a location to place your Wind
Spinner that is away from children’s play
areas.
Important:
The Wind Spinner must
be installed in firm soil. If you have loose
or sandy soil, we recommend securing it
in concrete.
Step 2.
Slide the Footed Stake Support
onto the Base Pole and position it so the
cutout sits over the attached Stake (Figure
1).
Step 3.
Screw the Center Pole on top of the
Base Pole and the Narrow Pole on top of
the Center Pole (Figure 1).
Step 4.
Slide a Spinner onto one side of the
Top Pole with horizontal bar, making
sure the front of the Spinner is facing out
(Figure 2, other side). Use the included wrench to tighten a nut onto the end
of the horizontal bar, slide a cap over it, then screw a Finial on top (Figure 3,
other side).
over please
