6 Probleemoplossing
6.1 Introductie - problemen oplossen
In dit hoofdstuk vindt u een aantal meldingen die bij een storing op het display kunnen worden weergegeven. Bij elke
melding staan de mogelijke oorzaak en de te uit te voeren stappen vermeld. Dit hoofdstuk bespreekt ook een aantal
symptomen die u op weg kunnen helpen als de robotmaaier niet werkt zoals verwacht. Meer suggesties voor uit te
voeren stappen bij storingen of symptomen zijn te vinden www.gardena.com.
6.2 Fault messages
Below a number of fault messages are listed which may be shown in the display of the robotic lawnmower. Contact
GARDENA customer service if the same message appears often.
Message
Cause
Action
Wheel motor blocked,
left
Grass or other object has wrapped around
the drive wheel.
Check the drive wheel and remove the grass
or other object.
Wheel motor blocked,
right
Grass or other object has wrapped around
the drive wheel.
Check the drive wheel and remove the grass
or other object.
Cutting system bloc-
ked
Grass or other object has wrapped around
the blade disc.
Check the drive wheel and remove the grass
or other object.
The blade disc lies in a pool of water.
Move the robotic lawnmower and prevent the
collection of water in the working area.
No loop signal
The power supply is not connected.
Check the wall socket connection and whe-
ther an earth-fault breaker has tripped or not.
Check that the low voltage cable is connected
to the charging station.
The low voltage cable is damaged or not con-
nected.
Check that the low voltage cable is not dama-
ged. Check that it is also properly connected
to the charging station and to the power sup-
ply.
The boundary wire is not connected to the
charging station.
Check that the boundary wire connectors are
fitted properly to the charging station. Repla-
the boundary wire op pagina 19.
Boundary wire broken.
Find out where the break is. Replace the da-
maged section of the loop with a new loop wi-
re and splice using an original coupler. See
Find breaks in the loop wire op pagina 49.
ECO mode is activated and the robotic lawn-
mower has attempted to start outside the
charging station.
Place the robotic lawnmower in the charging
station and press the STOP button. See
stellingen op pagina 27.
The boundary wire is crossed on its way to
and from an island.
Check that the boundary wire is laid accor-
ding to instructions, e.g. in the right direction
29.
The connection between the robotic lawnmo-
wer and the charging station has been bro-
ken.
Place the robotic lawnmower in the charging
station and generate a new loop signal, see
Nieuw lussignaal op pagina 27.
Disturbances from metal objects (fences,
reinforcement steel) or buried cables close
by.
Try moving the boundary wire.
Trapped
The robotic lawnmower has got caught in so-
mething.
Free the robotic lawnmower and rectify the
reason for it becoming trapped.
The robotic lawnmower is stuck behind a
number of obstacles.
Check if there are any obstacles which make
it hard for the robotic lawnmower to move on
from this location.
367 - 003 - 15.12.2017
Probleemoplossing - 43
