Gardena PowerMax Li-40/32, Operating Instructions Manual

Page: 23 / 412

3. Connect the charger cable (12) to the battery (13).
When the charging control lamp (15) at the
charger flashes green once per second the
battery is being charged. When the charging
control lamp (15) at the charger is lit green
the battery is fully charged.
For charging time, see Technical Data.
4. Check the charge status regularly while you charge.
5. When the battery is fully charged, disconnect the
battery (13) from the battery charger (C).
6. Disconnect the mains cable (14) from the mains.
Battery charging indicator
L1
B W
L2 L3
Battery charging indicator during charging:
100 % charged L1, L2 and L3 lit
67 - 100 % charged L1 and L2 lit, L3 flashing
34 - 66 % charged L1, L2 flashing
0 - 33 % charged L1 flashing
Battery charging indicator during operation:
• Push the button (B) on the battery.
67 - 100 % charged L1, L2 und L3 lit
34 - 66 % charged L1 und L2 lit
11 - 33 % charged L1 lit
0 - 10 % charged L1 flashing
To start the mower
WARNING!
• Risk of physical injury!
• Risk of injury if the product does not stop
when you release the start lever.
• Do not bypass the safety devices or
switches. For example do not attach the
start lever (17) to the handle.
16
17
To start:
The product is fitted with a two-handed safety
device (start lever (17) with safety interlock (16)) to
prevent the product from being turned on by
accident.
There are two start levers (17) fitted. Either one have to be
used to start.
1. Open the lid (18).
18
13
19
2. Put the battery (13) into the product.
3. Put the safety key (19) into the product and turn to
position 1.
4. Push the safety interlock (16) with one hand and pull
the start lever (17) with the other hand.
5. Release the safety interlock (16).
The product will start.
To stop:
1. Release the start lever (17).
2. Turn the safety key (19) to positon 0 and remove it.
To adjust the cutting height
The cutting height can be adjusted from 2 to 6 cm in 12
positions.
22 - 001 - 05.10.2016
23