•
The clock shows the current time.
•
Date shows the current day.
•
The number of operating hours indicates the number
of hours since the day of manufacture that the
robotic lawnmower has been in operation. The time
that the robotic lawnmower has spent mowing or
searching for the charging station is counted as
operating time.
•
AUTO, MAN or HOME show which mode of
page 30.
•
The battery status shows the remaining battery
charge.
•
The ECO symbol is displayed if the robotic
lawnmower is set in
ECO mode.
•
The clock symbol indicates when the timer settings
are set. The clock symbol is black when the robotic
lawnmower is not allowed to mow due to a timer
setting.
•
The
MENU text illustrates that the main menu can
be reached by pressing the multi-choice button that
is located under the text.
3.11.4 Submenus
There are a number of submenus under each option.
You can access all the functions to set the robotic
lawnmower settings via the submenus.
Certain submenus contain options that are ticked off to
the left. This means that these options are selected.
Check or uncheck the box by pressing
OK.
3.12 Menu structure
The main menu for the Flymo 1200R offers 3 options:
•
Timer
•
Security
•
Settings
The following section summarises the menu selections
found in the main menu and provides more detailed
information about how each function is used and which
setting options are available.
3.12.1 Main menu
Timer
The timer function is an ideal tool to
control which periods the robotic
lawnmower should not mow, for example
when children are playing in the garden.
Security
In this menu, settings relating to security
and the connection between the robotic
lawnmower and the charging station can
be made. There are 3 security levels to
choose from:
Low, Medium, High.
Settings
This selection allows you to make
changes to the general robotic lawnmower
settings such as date and time. You can
also turn on/off
ECO mode.
3.13 Timer
TIMER
Work hours 1
Work hours 2
Work days
Reset timer
The lawn should not be cut too often to obtain the best
mowing result. When the robotic lawnmower is allowed
to mow too much, the lawn may appear flattened.
Besides, the robotic lawnmower is subjected to
unnecessary wear. If the working area is less than the
robotic lawnmower's area capacity, the quality of the
grass can be further improved if it is cut every other day
instead of a few hours every day. In addition, the grass
benefits from resting completely during at least a three-
day period once a month.
The timer function is also an ideal way to control which
work hours the robotic lawnmower should not mow, for
example, when the children are playing in the garden.
The factory setting of the
Timer is 07:00-22:00 Mon -
Sun. This is normally a suitable setting for a working
area corresponding to the maximum capacity. If the
working area is less than maximum capacity then the
timer should be used to minimize wear on grass and
lawnmower. When setting the timer manually, calculate
that the robotic lawnmower mows about the listed
amount of the number of square meters per hour and
day listed in table Work capacity. See
on page 22.
The table below provides suggestions for different timer
settings depending on garden size. The times should be
365 - 001 -
Installation - 21
