3. Align the holes of the back crossbar (D) with
the holes in the two back legs (C). For each
hole, insert an M6 x 70 L bolt (DD) through
a back leg (C), through the back crossbar (D),
through an M6 washer (II), and into an M6
nut (GG). Do not tighten completely.
Hardware Used
M6 x 70 L Bolt
x 4
M6 Washer
x 4
M6 Nut
x 4
ASSEMBLY INSTRUCTIONS
4. Align the two holes in the bottom of the left
arm (G) with the holes in the left side of the
sling seat (H). For each hole, insert an
M8 x 45 L bolt (EE) through an M8
washer (JJ), through left arm (G) and into
the sling seat crossbar. Do not tighten
completely. Repeat this procedure on the
other side of the sling seat using the right
arm (F).
Hardware Used
M8 x 45 L Bolt
x 4
M8 Washer
x 4
SEAT ASSEMBLY
C
GG
II
DD
JJ
EE
5
3
4
DD
GG
II
D
G
EE
JJ
F
H
