Item # 60026
Mechanical Filter Box
(Model # MF750)
Questions, Problems, Missing Parts?
Before returning to your retailer, call our customer service department at
1-866-728-6187, 9 a.m. – 5 p.m. EST, Monday – Friday or e-mail us at [email protected].
Please have your model number available
Parts List
No Tools Required for Assembly
Part #
Description
Quantity
1
2
3
4
5
6
7
Filter Box-Bottom
Filter Box-Top
Filter Pad-Coarse
Filter Pad- Fine
Bio Media Balls
Hose Adapter
Pump Inlet
Connector
1pc
1pc
1pc
1pc
19pcs
1pc
1pc
●
Pump required – not included
(minimum rating 300 gph)
●
Tubing required – not included
(1/2 ID recommended)
Warnings
●
To reduce the risk of electrical shock, connect only to a properly grounded, grounding type receptacle (GFCI).
●
Do not exceed the voltage shown on the pump.
●
Always disconnect pump from the power source before beginning any maintenance or work on the pump.
●
Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if damage is found.
●
Do not remove the grounding pin from the power cord plug.
Cautions
●
Use a proper power source as indicated on the pump label.
●
Keep the cord away from high temperatures or other heat sources.
●
Avoid using the pump when temperatures fall below 41° F.
●
Do not pump heated liquids.
●
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
●
Operate in freshwater only. Avoid heavily chlorinated water.
●
Do not lift the pump by its power cord.
Operation Instructions
The MF750 is a low-profile, mechanical / biological filter system. It is designed to filter the water and promote healthy bacteria that
will provide a balanced environment in your pond. This filter is designed to work with a water pump that can circulate a minimum of
300 gallons per hour (pump not included). As a pre-filter, the MF750 reduces pond debris and particulate before they enter the
pump and other pond accessories. This pre-filterization reduces the clogging of your pump and accessories, and minimizes the
need for cleaning.
1.
Remove the filter from the packaging and then remove the Top Filter Box and Pads to find the Hose Adapter and the Pump
Inlet Connector.
2.
Attach the Hose Adapter to the Bottom Filter Box as shown.
