RTxxx LED lighting controllers - User Manual
trg is displayed. Press the SEL button.
Use the
p
and
q
buttons to select the trigger
(
IP1 or IP2) you want to set up, and press the
SEL button.
To set the trigger polarity so that it is active high,
press the
SEL button with F P displayed.
Or...
If you wish to set the trigger polarity so that it is
active low, use the
p
and
q
buttons to select
F-P and press the SEL button.
To set the error detection, press the SEL button
with F E displayed.
Or...
—
40
—
WWW.STEMMER-IMAGING.COM