RTxxx LED lighting controllers - User Manual
9.5
Setting up selected output
Set up selected output if you want to switch between to lighting levels on a
trigger input. Press and hold
SEL for one second ,
CH1
is displayed. Use
the
p
and
q
buttons to select the channel you want to set up, and follow
the keystrokes below:
The channel you want to set up is displayed.
Press the
SEL button.
Use the
p
and
q
buttons to select
SSE and
press the SEL button.
b1 is displayed. Press the SEL button to set the
first intensity level.
Use the
p
and
q
buttons to set the first intens-
ity level from 1% to 99.9%. The default setting is
50%.
Press the
SEL button.
b2 is displayed. Press the SEL button to set the
second intensity level.
—
36
—
WWW.STEMMER-IMAGING.COM