RTxxx LED lighting controllers - User Manual
If your light is voltage rated, use the
p
and
q
buttons to select
Uol
and press the
SEL
button.
For current rated lights, use the
p
and
q
but-
tons to set the rating in Amps, and press the
SEL
button.
Or...
For voltage rated lights use the
p
and
q
but-
tons to set the rating in volts, and press the
SEL
button.
The light's rating is set up and the RT200 is
ready to use.
9.3
Setting up continuous output
Press and hold
SEL
for one second ,
CH1
is displayed. Use the
p
and
q
buttons to select the channel you want to set up, and follow the keystrokes
below:
The channel you want to set up is displayed.
Press the
SEL
button.
—
32
—
RTxxx LED lighting controllers - User Manual
Use the
p
and
q
buttons to select
SCo
and
press the
SEL
button.
bri
is displayed. Press the
SEL
button to select
the light's intensity.
Use the
p
and
q
buttons to set the intensity
from 1% to 99.9%. The default setting is 50%.
Press the
SEL
button.
To set the error detection, press the
SEL
button
with
F E
displayed.
Or...
If you wish to disable the error detection, use
the
p
and
q
buttons to select
F-E
, and press
the
SEL
button.
Continuous output is set up on the RT200.
—
33
—
WWW.STEMMER-IMAGING.COM