RC1xx - User Manual
6
Connecting the RC1xx
Refer to
Section 11.1, Specifications and ratings
for the ratings of the
connections. The RC1xx's connections are shown below (an RC120 is
illustrated):
6.1
Power
Any power supply derived from mains electricity must have a Safety Extra
Low Voltage (SELV) output. Route low voltage wiring to the RC1xx
controller separately from mains electricity wiring.
If this is not possible, make sure the low voltage wiring has an insulation
rating that is appropriate or supplementary insulation is used. The
connections are shown below:
6.2
Lighting output
Note:
Make sure you set up the current or voltage rating for the light
before you connect it See
.
The lighting output connections must not be comoned to any other
controllers or grounded in any way. The connections are shown overleaf:
—
9
—