TR-RC1xx - User Manual
10.2.9 Viewing the trigger status
You can view the trigger input status and whether the light is pulsing when
the TR-RC is set to pulse or switched mode. To do this, press and hold
SEL
for I second and
CH1
is displayed. Use the
p
and
q
keys to scroll to
trg
and press
SEL
. The display shown below appears:
10.2.10 Viewing the output current
You can view an approximate measure of the output current from the
TR-RC front panel. The current measurement is updated roughly once per
second, but this can be slower when the TR-RC is set to pulsed operation.
To view the output current, press and hold
SEL
for 1 second and follow the
keystrokes below:
CH1
is displayed, Press the
SEL
button.
Use the
p
and
q
buttons to scroll to
UAL
and press the
SEL
button.
The measured output current is
displayed. Press the
SEL
button.
Continue to use the TR-RC normally.
—
29
—
