CL190/CL191 Lens Controller - User Manual
1
Getting started
Before you use this product, make sure that you have read and
understood
(or
, or
) and
Section 10.1 , Specifications and ratings
, and that you have
checked the CL190/CL191 fulfils your requirements.
Mount
the CL191 (see
Section 5 , Mounting the CL191
) and
connect
it up
(see
Section 6 , Connecting the CL191
), as required.
Set up
the CL190/CL191 for the desired operation as described in
Section 9 , Configuration commands
.
We recommend that you visit
for application notes on
this product.
For any trouble-shooting problems, contact Gardasoft for support.
1.1
C190/CL191 features - a summary
The CL190/CL191 product is a single channel lens controller for use in
machine vision applications. It works with the following ranges of Optotune
lenses:
EL-10-30
EL-16-40
EL-3-10
The CL190 is a hardware pack enabling OEMs to integrate the controller
into their products at PCB level. The CL191 is a board-only controller that
consists of 3 sections; power, control, and output as shown below. The
term 'CL191' is used throughout this document to describe both products
except when necessary to identify any difference.
—
5
—
