Garage Smart Hard Top Lifter, Installation And Operation Manual

Page: 29 / 41

Part IV: Attach the MyLifter Cables
to the Hard Top Lifter Frame
You need to lower the cables from the two MyLifter units in order to thread the cables
through the pulleys on the lifting frame. To lower the cables, you need to install the
MyLifter app and pair it to your MyLifter units.
Pair the MyLifter units with your smart device
1. Download and install the MyLifter app from Google Play or the App Store.
2. In the MyLifter app, tap
Add Devices in the bottom right corner to open the Avail-
able Lifters screen.
This screen displays a list of all lifters within range of your Bluetooth com-
munications. If you do not see any available lifters, make sure you have plugged
in the power cable to the nearest outlet.
On the MyLifter units, you should see a slow blinking yellow Status light.
3. Firmly press the Pair button next to the Status light on both lifters.
When the Status light blinks green, the lifters are paired with your app.
On the Available Lifters screen, your newly paired lifters are displayed with
their MAC (media access control) addresses as their default names.
4. Tap in the upper left-hand corner to go to the Home screen.
5. On the Home screen, tap Edit in the upper right-hand corner of the screen.