GarageSmart
TM
User’s Manual
13
3. Fill out
Table 1
from the Internet) with the information that was
entered from the previous steps, as this information will be needed in the
the GarageSmart™ Device to a secure Wi-Fi network
reference.
(6) (7)
Device Name
GarageSmart Mac Address:
This can be found on the back of the
GarageSmart™ device.
Port:
IP Address:
Gateway Address:
GarageSmart
Device
Device Name
GarageSmart
Mac Address
IP Address
Gateway
Address
1
2
3
4
5
6
7
8
9
10
Table 1
4. Repeat Steps 2 and 3 above for each
GarageSmart™ device that needs to be added
to the network.
5. Save changes to the router.
1.
Every routers login and Port Forwarding process is different from one another. If you do NOT have
access or know how to login into your router, or add port forwarding to your router, then refer to your
routers manual or
contact your Internet Service Provider (ISP)
as they will be able to assist you on
making the required changes to your router easily.
2.
For more information on port forwarding or a list of the most common type’s routers, visit
www.portforward.com/router.htm
or
3.
Regardless of what brand the router is or what software is on the router, the same type of information
will be entered, where you can type in the name of the application or service, which incoming
Port
the
router should watch for, the
IP Address
, and which
Protocol
to use.
4.
Set the Port Forward range (or Start and End Ports) the same.
Example: If the GarageSmart device has been configured to use
Port
31301
, then set the
Start Port
