96
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Possible adjustments for this example :
Sensor
Raising
Lowering
Front Left
200 - 157 =
43
No limit
Front Right
200 - 138 = 62
No limit
Rear Left
200 - 180 =
20
No limit
Rear Right
200 - 66 = 34
No limit
Table 28.
Possible adjustments for this example
Using Adjust Front sub-function
The front axle can be raised by a maximum of 200 - 157 = 43 mm. The front axle can be lowered wit-
hout a maximum limit in this case.
Using Adjust Rear sub-function
The rear axle can be raised by a maximum of 200 - 180 = 20 mm. The rear axle can be lowered without
a maximum limit.
Using Adjust All sub-function
The smallest of the limitations applies. The height of the two axles can be increased simultaneously to
a maximum of 200-180 = 20 mm. Both axles can be lowered without maximum limits.
The IIDTool automatically calculates these values and allows only changes within these parameters.
Summary of Contents for IIDTool Pro
Page 190: ...190 IIDTool Appendix...
