92
93
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
App
Access
To access the “Advanced Read” function and change the filter in the app, it is necessary to select the
fault function first. Then press Advanced and select the desired bits.
Figure 47.
App :
Advanced Read, bit selection
This button will apply bits
and mail preferences for the
current session. The faults
will be re-scanned automa-
tically.
This button will save bits
and mail preferences for
this and future sessions.
The faults will be re-scan-
ned automatically.
Example: If bit 0,
Test Failed
and Bit 2
Pending
are selected, all faults that have at least one of these
bits equal to 1 will appear in the fault list.
Summary of Contents for IIDTool Pro
Page 190: ...190 IIDTool Appendix...
