Gap Diagnostic IIDTool Pro, User Manual

Page: 52 / 194

52
IIDT
ool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.8.4 Integrated Interface, Navigation and Commands
The Integrated Interface ( II ) uses the buttons for cruise control on the steering wheel (and the buttons
for the audio system L319-10 and L320-10) as keys.The control layout varies depending on vehicle
models (Definition, Installation and Compatibility,
section 1.7
).
Prerequisites
• Have access to the vehicle on which the IIDTool will be used
• Ensuring that the vehicle is in a safe environment (
section 2.7.1
)
• Having taken precautions to avoid battery drainage (
section 2.7.2
)
• Becoming familiar with the
legend of controls
(next page)
Steps to navigate the Integrated Interface
1- Proceed with connecting the IIDTool as per
section 2.8.2
and wait until the “ IIDTool Ready ”
message to be displayed on the instrument cluster screen confirming that communication has
been established successfully. For all connection problems, please consult the FAQ section of
the manufacturer’s website :
https://www.gap-diagnostic.com/.
2- Launch the Integrated Interface by pressing on “Enter” (see
legend of controls
)
3- Navigate through the menus using the controls described below. The controls have a dual use
either for navigation and entering (see
legends of controls
).
Positions of cruise control commands
L322-02, L322-06 L322-10* L319-04, L320-05 L319-10, L320-10
Figure 24. Cruise control commands
*Can be used if the mobile device (App) is unavailable. Note : unstable display (
section 1.7
)