86
87
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
4.4.4
Layout definition
Main screen layout
Figure 45.
Height function layout
Front Axle, 0-
>
25:
current height, 0 mm, or default in this example is shown on the left while the selec
-
ted height setting (My offroad height in this example) is shown right, + 25 mm
.
Rear Axle, 0-
>
30:
current height, 0 mm, or default in this example is shown on the left while the selec
-
ted height setting (My offroad height in this example) is shown right, + 30 mm
.
Press and hold on the height setting to edit it. The Default value is the original backup up value upon
first connection of the tool to a vehicle and cannot be edited.
L322-02
Other height modes are also
