82
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units: Version 37, Firmware V4.0
4.3.3 Sub-Function “ Advanced Read ”
Definition
Advanced function helping to achieve further diagnosis in more complex scenarios.
Purpose :
This function allows setting the filter to indicate which status bit to consider when reading faults.
Usage :
• Analyze the conditions that could have contributed to triggering the confirmed fault.
• Check if tests are completed following a clear fault (repair) and after performing drive cycles (if
applicable).
• Especially interesting in the presence of intermittent problems.
Principle :
Create a filter to guide and impose verifications on a specific system.
CAUTION
The Advanced Read function should be used only by knowled-
geable people or professional automotive technicians. It is a
complement to assist in the diagnosis of more complex pro-
blems.
To access the Advanced Fault Reading and modify the filters in the app, it is necessary to select the
Faults function beforehand. Then press Advanced Mode and tick the desired bits.
