20
21
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
1.4 Brief descriptions of offered Functions
The IIDTool models offer a range of functions to achieve the four main objectives, categorized in the
following table.
Note :
Functions definitions, examples and operating procedures are found in
of this manual.
1.4.1 Functions categorized by Objectives
Diagnostic
Personnalisation
Repair process
Administer ECU
Faults
Read/Clear
Advanced Read
Height : Height
modification, air sus
-
pension
Calibrations
ECU Information
Live values (surveil
-
lance)
Car Configuration
Service routines
Save/Restore
Control IO (Inputs/
Outputs)
ECU update (Re-
Flash)
Convenience
Height Control
Table 1.
Functions categorized by Objectives
Note :
Some functions can help achieve more than one goal; this is particularly the case for the “Fault”
function and “Re-Flash” after a repair. Please consult Diagnostic Keys (
