184
185
GAP Diagnostic 2023-09-12 All Rights Reserved
User Manual G3 units : Version 37, Firmware V4.0
4.14.1 Find ECUs
Pre
App
build 93 iOS, 105 Android
Upon first use, the IIDTool will scan the communication buses and note which ECUs are responding.
When scanning is complete, the number of ECU found will be displayed. The resulting list is stored in
the IIDTool memory for up to 10 vehicles (except for the IIDTool
Pro
which has no limit). If a new ECU
is installed or removed from the vehicle, the Find ECU function shall be used to add or remove the
ECU from the list.
From
App
build 94 iOS, 106 Android
Upon first use, the IIDTool will scan the communication buses and note which ECUs are responding.
When scanning is complete, the name of ECU found will be displayed in
GREEN
while those non
preset will be in
RED
. The resulting list is stored in the IIDTool memory for up to 10 vehicles (except
for the IIDTool
Pro
which has no limit). If a new ECU is installed or removed from the vehicle, the Find
ECU function shall be used to add or remove the ECU from the list. Click on Validate to refresh the list.
Figure 119.
Rechercher Calculateur, Find ECUs
