VANDAL RESISTANT CAMERA
ZC-DT4039 NHA/ZC-DT4039 PHA
Operation Manual
Camera adjustments
Camera adjustments for the ZC-DT4039NHA/PHA
DIP switch settings
The bank of dip switches allow the following settings to be made:
SDN mode (SDN / ON)
When ON the camera operates in monochrome mode in reduced
lighting.
Auto White Balance (AWB / AWB.EX)
AWB: The camera operates in the normal Auto White Balance range
2700K~11000K.
AWB EX: The camera runs in the extended Auto White Balance
range 2000K~18000K.
Line Lock (INT / LL)
In LL mode, the V-Phase may be adjusted to compensate for
connected supply phase differences.
Only applicable for 24VAC supply - otherwise the camera operates
with INTernal sync.
Flicker less mode (FL / ON)
ON: The Camera reduces flicker in the image under fluorescent
lighting.
Back Light Compensation (BLC)
When set ON, this option improves the camera response to strong,
unwanted lighting effects behind the required subject.
Low Light Sensitivity (AGC-EX)
When set to EX sensitivity in low light is increased.
Focus & view angle adjustment
Twist the levers on the side of the varifocal camera to adjust the
focus and view angle settings.
TIP: If necessary, perform the final focus through the dome cover.
Hold it to the lens reversed to confirm the final results.
Vertical phase adjustment
Use this adjustment when using an AC supply to align the camera
phase with that of the supply.
Iris adjustment
This is factory set and should not normally require adjustment
except to compensate for excessive image blooming.
ZC-DT4039NHA/PHA camera specifications
Type / Format
NTSC
PAL
Scanning Element
2:1 Interlace,
H15.750 KHz/V:59.94 Hz
2:1 Interlace,
H15.625 KHz/V:50 Hz
Image Picture Element
1/3" Interline CCD
Effective Picture Element
768(H)
×
494(V)
752(H)
×
582(V)
Approximate pixels
380K
430K
Resolution (TV lines)
540 (normal)
Minimum Illumination
1.0 lx @ F1.2
S/N Ratio
50 dB
AGC.EX Gain
30 dB
AGC Preset Gain
26 dB
Back Light Compensation
Central area for auto iris
Exposure Control
DC Auto IRIS Drive
Sync System
Internal/Line lock
Line Lock (Phase Adj. Range)
0°~270°
Line Lock (Frequency Range)
60 Hz
±
1 Hz
50 Hz
±
1 Hz
Gamma Compensation
0.45
Video Output
1.0 Vpp, 75 ohm Unbalanced
White Balance
Automatic White Balance
AWB Normal Range
2700K - 11000K
AWB.EX Range
2000K - 18000K
Power Range
AC: 24 VAC
±
20% or DC: 12 VDC -10% +20%
Power Consumption
4W
Operating Temperature
-10°C to +50°C
Storage Temperature
-35°C to +60°C
External Dimensions
120(
φ
)mm x 100(H)mm
Lens Specifications
Focal Length
3.0~9.0 mm
F-No. F1.2
Iris Range
F1.2~F360
Minimum Object Distance
0.5 m
Angle Of View
Diagonal
116.2°~39.7°
Horizontal
90.0°~31.8°
Vertical
66.2°~23.9°
Lens Type
Vari-focal
