Ganz PIXELPRO SERIES, Interface Manual

Page: 75 / 111

67
Object Classification
Object Classification
VCAsys can perform object classification once the camera has been calibrated. The object
classification is based on properties extracted from the object including object area and
speed. VCAsys comes pre-loaded with the most common object classes, and in most cases
these will not need to be modified.
In some situations it might be desirable to change the classification parameters, or add new
object classes.
To adjust the object class settings, select the Classification page and the object class to
modify:
Adjust the minimum and maximum object speed and area, and apply the changes.
Objects that do not fit into any class are labelled as "Unclassified".