Ganz Genstar ZNT8-BA1F-T Series, User Manual

Page: 24 / 36

GANZ ZNT8-BA1Fxx-T Thermal Network Camera
User Manual
22 Issue V1.0 (2016-02-22)
4.4 Setting Local Network Parameters
Description
Local network parameters include:

IP protocol

IP address

Subnet mask

Default gateway

Dynamic Host Configuration Protocol (DHCP)

Preferred Domain Name System (DNS) server

Alternate DNS server

MTU
Procedure
Step 1
Choose Device Configuration > Local Network , the Local Network page is
displayed.
Step 2
Set the parameters according to Figure 4-2.
Table 4-2 Local network parameters
Parameter Description Setting
IP Protocol IPv4 is the IP protocol that uses
an address length of 32 bits. [Setting method]
Select a value from the
drop-down list box.
[Default value]
IPv4
Obtain an IP
address
automatically The device automatically
obtains the IP address from the
DHCP server. [Setting method]
Click the button on to
enable
obtain IP address
automatically .
NOTE
To query the current IP
address of the device, you
must query it on the
platform based on the
device name.
DHCP IP IP address that the DHCP server
assigned to the device. N/A
IP Address Device IP address that can be
set as required. [Setting method]
Enter a value manually.
[Default value]
192.168.0.120