![background image](http://html1.mh-extra.com/html/gantner/q-brixx-a101/q-brixx-a101_quick-start-manual_560952004.webp)
Q.uick Start Guide
Q.brixx
4
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
SYSTEM PREPARATION
Introduction
Thank you for selecting Gantner Instruments as your data acquisition solution. This
quick start guide will discuss how to install and setup your system, including related
hardware and software features of a Q.brixx system. Use this document in conjuncture
with the Q.brixx Manual for complete details.
Software Requirements
The Q.brixx system is a great portable data acquisition system connected to a PC or a
completely autonomous data logger with optional PAC capabilities. To perform system
setup and configuration, test.commander is utilized.
A Q.brixx system consists of a test controller and an assortment of measurement
modules based on the required signals. ICP100, which is included with every copy of
test.commander is used to perform the channel configuration in every measurement
module.
Other Gantner software tools not discussed within this guide can be explained on a
project by project basis. Contact us today!
Software Downloads
test.commander:
https://gi-productbase.gantner-instruments.com/en/rest_api/downloads/public/46/
PC Requirements
Minimum OS: Windows XP
Recommended RAM: 4 GB
Recommended Processor: Dual Core (2+ GHz)
Data Storage: Depends on application requirement.
1 x Ethernet port (minimum)
1 x USB port (minimum)
Accessories
Ethernet Cable (CAT5E or better)
Electrical Wire (18-22 AWG)
Hex Key / Allen Wrench (2.5 mm)
Torx T10 Screwdriver
Phillips Screwdriver