GT7 Terminal
Configuration
www.gantner.com
HB_GT7-2x00-3x00--EN_12
63
5.6.18
Licensing
Figure 5.44
– GT7 terminal web interface – License Information
On this page, the network and license information for the GT7 terminal are displayed and you can also add new
license points here.
- Serial number:
The serial number of the GT7 terminal.
- MAC address LAN:
Unique, internal network address of the GT7 terminal.
- License points:
To start apps (e.g., G7 Central Locker, G7 Access, or G7 Info) and enable other
features, license points are required. These can be purchased from GANTNER. The
available license points are displayed here.
- Addon bus devices:
Maximum number of devices (controller, reader, etc.) that can be connected to the
expansion bus of the GT7 terminal.
- Open card:
This field indicates whether the
“Open Card” license is enabled. If the license is
enabled, the certificate check is switched off, i.e., data carriers that were not supplied
by GANTNER can also be used.
- License code:
A license code for the installation of additional apps or to activate additional functions
can be entered here.
License codes can also be conveniently managed via projects in the G7 Connect and allocated to the individual
devices.