GL7p - Battery-powered, door-mounted electronic locker lock GL7p
Installation
22
HB_GL7p--EN_12
www.gantner.com
3.5 Door Width and Thickness
The GL7p is suitable for locker doors with a door leaf thickness of 1 to max. 28 mm. Depending on the thickness of
the door leaf, different screws and/or the supplied spacer sleeve must be used for anti-rotation prevention. For
details, see "3.8.2 Instructions for Installing the GL7p".
When installing the GL7p in lockers with narrow doors, ensure that the GL7p does not touch the locker body when
opening and closing the door (see following picture).
Figure 3.1
– Width and thickness of the locker door
3.6 Latch Types
The GL7p comes with a standard latch. This has a straight shape and when installing in a new locker, the position of
the latch stop in the locker body must be aligned accordingly so that the latch is present at the stop when the door is
closed. The distance from the underside (mounting side) of the GL7p to the latch is 34 mm (1.34 in) (see following
picture).
Figure 3.2
– Standard latch included
