GAT Vending 6100 BA
Startup and Configuration
www.gantner.com
HB_GAT-VENDING6100BA--EN_121
25
5.3 Configuration Settings
The configuration settings are the device functions that determine how the GAT Vending 6100 BA interacts with the
user. These settings can be viewed and modified using "GAT Config Manager" PC software. This section provides
an overview on how to define the configuration settings with GAT Config Manager.
A user guide is available when you install GAT Config Manager. The user guide contains detailed information
about the functionality and use of the software.
In order to configure a GAT Vending 6100 BA, you must know the communication settings such as the IP address
and port number (default 8208) for TCP/IP configuration. To find this information see section "5.2. System Settings".
Configuration Options
There are two ways to configure a GAT Vending 6100 BA with GAT Config Manager.
- Direct configuration: A connection to the GAT Vending 6100 BA must be established by entering all the
communication settings required for a manual connection.
- Project configuration: A project is created where the GAT Vending 6100 BA and its communication settings are
defined once. Configuring the device is then done simply by cli
cking on the “Configure device” option in the
project. One project can contain multiple devices.
To begin configuring a device first start GAT Config Manager via the start menu within Windows
®
. The default
location of the software is "Programs > Gantner Electronic GmbH > GAT Config Manager".
5.3.1 Direct Configuration
After opening GAT Config Manager, complete the following steps to directly configure a GAT Vending 6100 BA.
► Click on the "Open Device" icon at the top of the program.
o
The device configuration wizard opens.
Figure 5.12 - Open device for direct configuration
o
The wizard requests the information required to connect to the GAT Vending 6100 BA.
► Go to the next page of the wizard by clicking “Next”.
To return to a previous pag
e click “Previous” and to close the wizard click “Cancel”. The "Finish" button
becomes available when the wizard has received all the necessary information.
Summary of Contents for GAT Vending 6100 BA
Page 2: ......
Page 46: ...GAT Vending 6100 BA Technical Data 46 HB_GAT VENDING6100BA EN_121 www gantner com ...
Page 47: ......
