G&L MMC-A2, Hardware Manual

Page: 18 / 192

Installation, Operation, & Maintenance
10 MMC Hardware Manual G & L Motion Control Inc.
Figure 3-1: MMC Mounting Dimensions
3.2 Adding an Option Module to the MMC Control
Several Option Modules are available to add functionality to the MMC
system. These modules are described in the later sections of this manual.
The standard Standalone MMC Control (MMC-A2, MMC-A4, and MMC-
S8) accepts up to two MMC Option Modules. The Standalone MMC Control
MMC
.55" (13.97 mm)
1.00"
(25.4 mm)
2.10" (53.34 mm)
9.
59" (24
3
.5
9 mm)
8.
75" (22
2
.2
5
m
m
)
.218" (5.54 mm)
1.05" (26.67 mm)
.55"
Side Cover
Screw Head
.040" Thickness
.080" Thickness
NOTE: Add the side
cover and screw head
thicknesses to the
unit’s dimensions for
total width.
.500" (12.70 mm) clearance required
for Standalone Digital MMC Control
(13.97 mm)
Note: Unit is 5.3”
(134.62 mm) deep.