![background image](http://html1.mh-extra.com/html/gandg/gg-image-p4100-series/gg-image-p4100-series_user-manual_3070763063.webp)
54
7.2. Print Settings
You can set up printing parameters with the following two methods before sending printing work
(such as paper type, paper size and paper source).
Operating system
Temporary printing setup change Permanent default setup change
Windows 7
1. Click “File” menu – “Print” –
“Select printer" - “Printer properties”
(the detailed steps may differ
because of multiple operating
systems).
1. Click “Start” menu- “Control Panel”
– “Devices and Printers”.
2. Right click on the printer icon,
select “Printing preference” and then
change setup and save it.
macOS
1. Click “File” menu – “Print”.
2. Change setup in the window
popping out.
1. Click “File” menu – “Print”.
2. Change setup in the window
popping out and click to save the
preset. (Select preset every time
before printing, or print according to
default setup.)
7.3. Cancel printing
The current printing work can be cancelled in printing process. As for printers with LCD control
panel, the current printing work can be cancelled by pressing “Cancel”; as for printers with LED
control panel, the current printing work can be cancelled by pressing the “Cancel” key for more
than 2s.
7.4. Printing Mode
The printer can print with auto feed tray and manual feed tray. The defaulted state is auto
selection, and if there is printing medium in the manual feed box, papers in manual feed tray will
be used with priority.
7.4.1. Printing with the Automatic Feeder Tray
Before printing, please make sure mediums of corresponding quantity have been installed inside
the auto feed tray, and there is no printing medium in the manual feed tray.
Summary of Contents for GG IMAGE P4100 Series
Page 102: ...G G...