Establishing a KVM-over-IP™ connection for the first time
G&D VisionXS-IP-F-DP-UHR ·
30
English
4. Enter the following data under
Main Network
:
5. Press
F2
to save your settings.
Configuring a KVM-over-IP connection
The
IP address
of the console module (host) as well as the
control port
of the computer
module must be specified to establish a
KVM-over-IP
connection through the com-
puter module.
The configuration of both the
communication ports
and the
data ports
are automatically
exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
Ctrl
+
Num
to open the OSD of computer module.
2. Select the entry
KVM connection
and press
Enter
.
3. Enter the following data under
Network setting
:
4. Press
F2
to save your settings.
Global
preferences:
Press
F8
to select the global preferences:
Static:
uses static settings.
DHCP:
obtains settings from a DHCP server.
Hostname:
Enter the device hostname.
Domain:
Enter the domain the device is to belong to.
Gateway:
Enter the gateway IP address.
DNS 1:
Enter the IP address of the DNS server.
DNS 2:
Optionally, enter the IP address of another DNS server.
NOTE:
The configuration of both the
communication ports
and the
data ports
are
automatically exchanged between the two modules.
Control port:
Enter the number of the port you want to use.
Communication port:
Enter the number of the port you want to use.
Data port:
Enter the number of the port you want to use.
Summary of Contents for VisionXS-IP-F-DP-UHR
